我們都知道模具在生產過程中的設備是精密工具，操作方法不當或因操作失誤都會造成影響，塑料在制作過程中會產生一定的溫度，需要一定的防護措施，使用壽命直接左右注塑制品成本。因此，濟南注塑模具質量并維護和保養好，延長其使用周期，是注塑制品加工企業降本增效的重要內容。

We all know that the equipment in the production process of the mold is a precision tool. Improper operation methods or errors in operation will have an impact. The plastic will produce a certain temperature in the production process, and certain protective measures are required. The service life directly affects the cost of the injection molded products. Therefore, the quality and maintenance of Jinan injection molds, and the extension of their service life are important contents for injection molding product processing enterprises to reduce costs and increase efficiency.

注塑模具是一種生產塑膠制品的工具，也是賦予塑膠制品完整結構和準確尺寸的工具。注塑成型是批量生產某些形狀復雜部件時用到的一種加工方法。由稱為前模（凸模）的模芯和后模（凹模）的模腔組成。模具開發過程，通常始于缺乏細節的初始設計，如果直接使用初始設計可能會導致生產出令人不滿意的產品。開始的模具設計所需的關鍵部分的設計信息包括零件尺寸、璧厚和預期的生產量。

Injection mold is a tool to produce plastic products, and it is also a tool to give plastic products complete structure and accurate size. Injection molding is a processing method used in batch production of some complex parts. It is composed of a mold core called a front mold (male mold) and a mold cavity of a rear mold (female mold). The mold development process usually begins with the initial design lacking details. If the initial design is directly used, it may lead to the production of unsatisfactory products. The design information of key parts required for the initial mold design includes part size, wall thickness and expected production capacity.

如果在模具加工制造的過程當中，模具的表面不夠光滑的話，會影響塑膠制品的表面光潔度，也很容易造成塑膠制品粘模的情況出現，這樣很難保證產品的完整性，對于這種情況的廠商，需要將模具的表面加工更加細致話，落實到實處，從而避免這種情況的發生，這樣能夠處理在制作過程中出現的問題。

In the process of mold processing and manufacturing, if the surface of the mold is not smooth enough, it will affect the surface finish of the plastic products, and it is easy to cause the plastic products to stick to the mold, so it is difficult to ensure the integrity of the products. For manufacturers in this situation, they need to implement the surface processing of the mold more carefully to avoid this situation, In this way, problems occurring in the manufacturing process can be handled.

雖然模具設計和模具制造在這個行業里面是焦點，具體而言，業務開發需要定義供應鏈并建立初始訂單。在產品開發過程中需要對業務人員進行有效的培訓，包括測試、組裝、驗證性能水平、標準等人員操作進行培訓。制作處理的產品不如人意，需要對其進行整改調整方案，以達到預期效果。

Although mold design and mold manufacturing are the focus in this industry, specifically, business development needs to define the supply chain and establish the initial order. In the process of product development, it is necessary to provide effective training for business personnel, including training for testing, assembly, verification of performance level, standards and other personnel operations. The products produced and processed are not satisfactory, so rectification and adjustment plan shall be carried out to achieve the expected effect.

模具為什么要設計排氣孔？因為注塑模具加工制造中將模具的密封性做的可以的話，很有可能會導致在注入這些熔體之后，內部會出現很多的氣泡，這樣一來同樣會影響產品的質量，因此為了避免這種情況的出現，那么在注塑模具加工制造的過程中要設計排氣孔，能夠對外出氣將其不需要的物質排出外面

Why should the mold design exhaust holes? If the sealing of the injection mold is good in the processing and manufacturing of the injection mold, it is likely that many bubbles will appear inside after the injection of these melts, which will also affect the quality of the product. Therefore, in order to avoid this situation, exhaust holes should be designed during the processing and manufacturing of the injection mold, so as to exhaust the unwanted substances

以上就是小編為大家分享模具的事情，其實，加工企業應在注塑機、模具正常運轉情況下，測試模具各種性能，并將后面成型的塑件尺寸測量出來，通過這些信息可確定模具的現有狀態，找出其問題的所在以及維修措施。更多事項就來我們網站http://m.wtkbt.com咨詢了解吧。

The above is what Xiaobian shared with you about the mold. In fact, the processing enterprise should test the various performances of the mold under the normal operation of the injection molding machine and the mold, and measure the size of the plastic parts formed later. Through this information, the existing state of the mold can be determined, and the problems and maintenance measures can be found. For more information, please visit our website http://m.wtkbt.com Consult and understand.